Refurbished Agilent 1100 and 1200 HPLC Enquiries
Compare requirements for refurbished Agilent 1100 and 1200 HPLC systems. Discuss individual modules, accessories and service with Vision Analytical.
Identify the series and every requested module
An enquiry for refurbished Agilent 1100 or 1200 HPLC equipment should identify the series and the individual modules needed. If your laboratory already has an Agilent setup, list the components you plan to retain and those you want to replace. Avoid treating the two series as a single interchangeable product description. Your application and existing setup are useful starting points for a configuration discussion. Vision Analytical, based in Ambernath, Thane, Maharashtra, has operated since 2016. Its analytical instrument business covers sales, refurbished enquiries, service and spare parts for customers in Maharashtra and Gujarat, including pharmaceutical laboratories.
Compare a complete system with a module request
A complete HPLC system enquiry and an enquiry for one replacement module require different information. For a system, explain the detector requirements, intended workflow and software arrangements your laboratory expects. For a module, provide the exact model reference and describe the equipment it must work with. Ask what accessories and documentation accompany the individual unit being offered. Keep condition, availability and pricing connected to that unit rather than the broad Agilent 1100 or 1200 series name. A model landing page does not establish that either series is presently in stock, and it should not be used as evidence of a confirmed configuration.
Make the support scope reviewable
Before choosing a refurbished arrangement, discuss how the laboratory will accept the equipment and what support it expects afterwards. Installation, preventive maintenance, breakdown enquiries and spare parts can be separate requirements and should be described as such. Ask for written details of any warranty and identify which items belong in an AMC discussion. If the enquiry follows a fault in an existing system, share the observed symptom and module identity so that a replacement request is not confused with a service request. The services and spare parts pages provide related enquiry routes. Send the configuration list, application summary and laboratory address through the contact page to begin a focused discussion with Vision Analytical.
Are Agilent 1100 and 1200 modules interchangeable?
The 1100 and 1200 series share a modular design, so pumps, autosamplers, column compartments and detectors are often combined across the two generations. What must be checked is the control software and firmware compatibility for the exact combination offered, and the condition of the wear parts in each module: pump seals and check valves, needle and rotor seal in the autosampler, lamp hours in the detector.
Which five parts cause almost every HPLC fault?
Five parts account for nearly every HPLC fault: the pump (worn seals, fluctuating or falling pressure, leaks), the injector or autosampler (blocked needle, worn rotor seal, carryover), the column (falling efficiency, rising backpressure, spreading peaks), the detector (lamp at end of life, air or dirt in the flow cell) and the degasser (air causing baseline jumps). Vision Analytical, working with laboratories across Maharashtra and Gujarat since 2016, checks these five in that order before replacing anything.
Which HPLC spares get replaced most often?
The parts that wear are predictable: deuterium lamp (roughly 2000 hours of use), tungsten lamp for the visible range, pump seal, piston, check valve, rotor seal, needle seat, in-line filter, solvent frit, guard column, PEEK and steel fittings, ferrules, vials and septa. Vision Analytical supplies these consumables alongside HPLC, GC, LC-MS, GC-MS, UV-Vis and FTIR service across Maharashtra and Gujarat.